# Pool Plumbing Pressure Testing & Leak Diagnostics Melbourne | Palatial

URL: https://palatialpools.com.au/pool-plumbing-pressure-testing-melbourne/

Pool plumbing leak and pressure diagnostics in Melbourne: each line isolated and tested, suction checked under vacuum, results before any digging. Call 03 4517 6657.

[Home](https://palatialpools.com.au/)/[Custom pool plumbing](https://palatialpools.com.au/pool-plumbing-melbourne/)/Leak and pressure diagnosticsFind it before you dig

# Pool Plumbing Leak & Pressure Diagnostics

A pool losing water, a pump that keeps losing prime or a damp patch near the pad all point at the plumbing, but none of them tells you which line. We isolate each circuit and test it on its own, so digging starts in the right place, or doesn't need to start at all.

Request a quote[03 4517 6657](tel:+61345176657)

Line by line

Skimmer, main drain, returns and features tested separately.

Pressure and vacuum

Return lines held under pressure. Suction lines checked for air ingress.

Evidence first

Results recorded before anyone lifts a paver.

Each line isolated and tested on its own, so any digging starts in the right place.

## How we narrow it down

01

### Evaporation or leak?

Every pool loses water to the weather, and on a hot, windy Melbourne day that can be a lot. A bucket test compares the pool with water beside it, so we know whether there's a leak at all before testing lines.

02

### Water out, or air in?

Return lines leak water out under pressure. Suction lines often draw air in instead, showing up as bubbles in the pump basket or a pump that loses prime, sometimes without any visible water loss.

03

### Isolate, then test

Each line is plugged and tested on its own: returns held under pressure with a gauge, suction lines checked for air ingress. A line that won't hold is a line with a fault.

04

### Then locate

Once the faulty line is known, we trace its route and narrow the position down before any paving, decking or garden is disturbed.

## Common culprits

On the suction side: pump lid O-rings, unions, valve stems and threaded joins drawing air. At the pad: cracked fittings and weeping glue joints. Underground: joints stressed by ground movement or tree roots, which is common in Melbourne's reactive clay. Around the shell: skimmer throats, return fittings and light niches.

## How this differs from shell leak detection

This page is about the pipework. Leaks in the shell itself, through cracks, fittings or light conduits, are covered by our pool and spa leak detection service, and many investigations use both.

Pool pipework exposed in a trench where a buried line was being repaired.

What we measure and specify

- Bucket test to rule evaporation in or out
- Pump basket and lid inspected for air ingress
- Each suction line checked on its own
- Each return line held under pressure
- Pad joints, unions and valve stems inspected
- Faulty line route traced before excavation

What you get

### A named line

Which circuit is failing, backed by a test result.

### A located fault

As close as the site allows before any excavation.

### A repair plan

The least invasive fix, with options where there's a choice.

Questions

## Pool Plumbing Leak & Pressure Diagnostics: common questions

How do I know it's a leak and not evaporation?+

A bucket test compares the pool's water loss with a bucket of pool water sitting beside it. If the pool drops noticeably more, something other than the weather is involved.

Why is there air in my pump basket?+

Usually a suction-side air leak: a lid O-ring, a union, a valve stem or a join upstream of the pump. Low water level at the skimmer can do it too.

Do you have to dig up the yard?+

Not to test. Each line is tested from the pad and the pool. Digging only happens once a fault has been proven and located.

Is this the same as leak detection?+

It's the plumbing half of it. Shell, fitting and light-niche leaks are covered by our leak detection service.

Related specialist plumbing

[Plant-room relocation and full re-plumbingNew runs sized for the new distance, with buried pipework tested before it's reused.](https://palatialpools.com.au/pool-plant-room-relocation-melbourne/)[Hydraulic design, flow and head-loss planningFlow, head and balance worked out before a single fitting is cut.](https://palatialpools.com.au/pool-hydraulic-design-melbourne/)[Custom manifolds and plant roomsCustom manifolds that let every line be set, isolated and serviced on its own.](https://palatialpools.com.au/custom-pool-manifold-plant-room-design-melbourne/)[All custom pool plumbingRepairs through to full plant room builds.](https://palatialpools.com.au/pool-plumbing-melbourne/)

Try the [pump optimiser](https://palatialpools.com.au/pump-optimiser/) or the [filter sizing calculator](https://palatialpools.com.au/filter-sizing/) for a first look, or book a [pool inspection](https://palatialpools.com.au/inspections/).

Enquiries and quotes

## Talk to us about your plumbing

Send a few wide photos of the plant and a short description of what the pool needs to do. We'll come back with the right first step.

[03 4517 6657](tel:+61345176657)[0420 117 665](tel:+61420117665)[service@palatialpools.com.au](mailto:service@palatialpools.com.au)

Monday-Friday 9:30am-4:30pm, Saturday 9:30am-3:30pm. Sunday closed.

NamePhoneEmailSuburb (optional)How can we help?WebsiteA phone number or an email address is enough.

Send enquiry
