# Pool Hydraulic Design & Head Loss Planning Melbourne | Palatial Pools

URL: https://palatialpools.com.au/pool-hydraulic-design-melbourne/

Pool hydraulic design in Melbourne: flow targets, static head, friction loss, pump duty points and circuit balancing, worked out before any pipe is cut. Call 03 4517 6657.

[Home](https://palatialpools.com.au/)/[Custom pool plumbing](https://palatialpools.com.au/pool-plumbing-melbourne/)/Hydraulic design, flow and head-loss planningThe numbers behind the plumbing

# Pool Hydraulic Design: Flow, Head Loss & Balancing

Every pool plumbing problem is a hydraulics problem underneath. Weak returns, a noisy pump, a heater that trips or a spa that won't jet properly usually come back to flow, head and how the circuits share the pump. We work those numbers out before anything is built.

Request a quote[03 4517 6657](tel:+61345176657)

Static head

The vertical lift between water level and the furthest outlet, measured, not guessed.

Friction loss

Every metre of pipe and every fitting adds resistance. We add it up.

Duty point

Where the pump curve meets your system curve, the flow you'll actually get.

Flow, head and balance worked out before a single fitting is cut.

## The hydraulics, plainly

01

### Total head is two numbers

A pump has to overcome static head, the height difference it lifts water through, plus friction loss in every pipe, fitting, valve, filter, heater and cell. Together they set the total head the pump sees at a given flow.

02

### Friction climbs with flow

Friction loss rises roughly with the square of the water's velocity. Push twice the flow through the same pipe and the loss goes up about four times. That's why undersized pipe punishes big pumps.

03

### The pump curve meets the system curve

Each pump has a curve of flow against head. Your plumbing has a curve too. Where they cross is the duty point: the flow you actually get. Changing the pump moves you along your system curve. Changing the pipework changes the curve itself.

04

### Balance is set, not assumed

Where several returns or features share a pump, water takes the easiest path. Balancing valves, sensible pipe sizing and commissioning with gauges make sure the far return, the spa jets and the waterfall each get their share.

## Velocity limits we design to

Industry practice keeps suction velocity low, commonly around 1.8 metres per second or less, and return velocity a little higher. Staying under those limits keeps friction, noise and cavitation risk down. On the suction side, it also matters for safety: suction outlets and their layout are designed with entrapment risk in mind, and the Australian Standard for pool water recirculation systems (AS 1926.3) covers that area.

## High-head and suction-lift sites

When a pool sits well above or below the plant, static head drives every decision. A pump above the water has to lift on suction, which leaves less margin before it cavitates. A pump far below needs check valves and isolation that hold back the full column of water. Waterfalls, raised spas, infinity edges and roof-mounted solar all add their own lift.

## Measured on site

Calculations are checked against measurements: a vacuum gauge on the pump inlet, pressure across the filter and heater, and flow where it can be measured. If the numbers don't agree with the drawing, we find out why before building on them.

Individually plumbed suction and return lines with 3-way diverter valves feeding a fibreglass filter and a variable-speed pump.

What we measure and specify

- Target turnover and feature flows
- Static head for every circuit
- Pipe lengths, diameters and fittings counted
- Losses across filter, heater and cells at design flow
- Pump curves against the system curve
- Balancing valves and test points specified

What you get

### A duty point you can trust

Pump selection based on your system curve, not a catalogue guess.

### Circuits that share fairly

Returns, spa jets and features balanced at commissioning.

### Fewer surprises later

Plumbing sized to carry future equipment without choking it.

Questions

## Pool Hydraulic Design: Flow, Head Loss & Balancing: common questions

Why does a bigger pump sometimes make things worse?+

If the pipework is the restriction, a bigger pump mostly adds friction, noise and power use. On the suction side, it can starve itself and cavitate. Fixing the restriction usually beats upsizing the pump.

What is static head?+

The vertical height the pump has to move water through. Pools well above or below the plant room, raised spas, waterfalls and roof solar all add static head.

Can you work out why my spa jets are weak?+

Usually, yes. It's often a balance problem: water taking an easier path back to the pool, a valve set wrong, or pipework too small for the jets. We measure it and show you.

Do you use the online calculators for this?+

Our pump optimiser and filter sizing calculators are good for a first look. Site design uses measured lengths, heads and component losses for the specific pool.

Related specialist plumbing

[Custom manifolds and plant roomsCustom manifolds that let every line be set, isolated and serviced on its own.](https://palatialpools.com.au/custom-pool-manifold-plant-room-design-melbourne/)[Leak and pressure diagnosticsEach line isolated and tested on its own, so any digging starts in the right place.](https://palatialpools.com.au/pool-plumbing-pressure-testing-melbourne/)[Heat pump, gas and solar integrationCorrect order, bypasses and flow so each heat source does its job.](https://palatialpools.com.au/pool-heating-plumbing-integration-melbourne/)[All custom pool plumbingRepairs through to full plant room builds.](https://palatialpools.com.au/pool-plumbing-melbourne/)

Try the [pump optimiser](https://palatialpools.com.au/pump-optimiser/) or the [filter sizing calculator](https://palatialpools.com.au/filter-sizing/) for a first look, or book a [pool inspection](https://palatialpools.com.au/inspections/).

Enquiries and quotes

## Talk to us about your plumbing

Send a few wide photos of the plant and a short description of what the pool needs to do. We'll come back with the right first step.

[03 4517 6657](tel:+61345176657)[0420 117 665](tel:+61420117665)[service@palatialpools.com.au](mailto:service@palatialpools.com.au)

Monday-Friday 9:30am-4:30pm, Saturday 9:30am-3:30pm. Sunday closed.

NamePhoneEmailSuburb (optional)How can we help?WebsiteA phone number or an email address is enough.

Send enquiry
